Supplementary Procedures
6-4
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
Reconfiguring
Reconfiguring
Reconfiguring
Reconfiguring
the VPN Device
the VPN Device
the VPN Device
the VPN Device
To reconfigure your VPN device:
1.
Configure and run your terminal emulation program (such as
HyperTerminal) to create an active console session.
The VPN device recognizes a changed configuration and
prompts you to reboot the device.
2.
Press Enter to reboot the device.
The VPN device reboots and displays its Manufacturing
Mode Main menu:
1. Configuration
2. Self-diagnostics test
3. User-diagnostics test
4. Burn-in traffic tests
5. Final Assembly and Serializations
3.
In the Main menu, select
Configuration
.
A new menu appears with two options:
LAN
and
WAN
.
4.
In the menu, select
WAN
.
5.
In the Main Menu, select
Final Assembly and
Serializations
.
The device asks:
Is there an Access Pro
Installed? Please confirm (y/n)
6.
Enter
n
.
The device prompts:
Enter the serial no:
7.
Enter the serial number of your device (located on the rear
side of the chassis directly beneath the handle).
The device prompts:
Please confirm (y/n)
8.
Enter
y
.
The device prompts:
Do you want to reboot...
9.
Enter
y
.
The device prompts:
Please confirm (y/n)
10. Enter
y
.
The VPN device reboots into production mode, whereby the
License Agreement appears. Follow the instructions in this
Summary of Contents for sa3110
Page 2: ...ii ...