Supplementary Procedures
6-10
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
Deleting the Current VPN Device
Deleting the Current VPN Device
Deleting the Current VPN Device
Deleting the Current VPN Device
Configuration
Configuration
Configuration
Configuration
This section tells you how to delete the current VPN device
configuration and restore the factory defaults.
Steps
Steps
Steps
Steps
To delete the current VPN device configuration:
1.
At your desktop, double-click the HyperTerminal icon.
The Console HyperTerminal window appears.
2.
Press Enter three times.
This causes HyperTerminal to send a handshake to the VPN
device attached to COM port
N on your PC.
When you receive a response from the device, a name-and-
state prompt similar to the following example appears on the
screen:
namevpn:NORMAL>
3.
At the name-and-state prompt, enter
enable
.
A password prompt appears.
4.
At the password prompt, enter your VPN device password.
As you hit Enter, a row of stars appears.
When the VPN device accepts the password, the word
Passed
appears on the screen.
5.
The name-and-state prompt appears again:
namevpn:NORMAL#
6.
At the name-and-state prompt, enter
show dir
.
A directory listing for the VPN device appears.
Summary of Contents for sa3110
Page 2: ...ii ...