Connecting the Device to the Network
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
3-13
Connecting the Device to the Network
Connecting the Device to the Network
Connecting the Device to the Network
Connecting the Device to the Network
In this section, you connect your VPN device to the network
behind your firewall.
Steps
Steps
Steps
Steps
To connect the VPN device to the network:
1.
Turn the device off before connecting network cables.
2.
Connect the supplied Ethernet cables to the Ethernet
interfaces.
3.
Connect your Ethernet LAN cables to the shielded cables.
4.
Turn the device on.
Once you have connected your VPN device to the network
behind your firewall, configure the device using VPN
Manager included on the CD-ROM. Follow the instructions in
the next chapter, "Installing VPN Manager."
Next Step
Next Step
Next Step
Next Step
Configuring Syslog for Troubleshooting (page 3-13)
Summary of Contents for sa3110
Page 2: ...ii ...