HP R12000 XR, User Manual

Page: 65 / 126

Configuration 65
setup options and system values can be configured through the Service Menu and sent to the Management
Module web interface.
All status information included in the Management Module Service Menu is also available by signing into the
Management Module web interface (on page 71 ).
To navigate the Service Menu:
1.
Enter the corresponding option number at the prompt to open a submenu.
2.
Follow the on-screen prompts to enter or change configuration information.
3.
Enter 0 at the submenu prompt to go to the previous menu.
Or, enter 0 at the main menu prompt to exit the utility.
4.
Press the Enter key to refresh the screen.
The Management Module card resets automatically to allow configuration changes to take effect.
Service Menu
This menu only appears when accessing the Management Module card using a terminal emulation program.
Option number Submenu Description
1
Module Configuration Opens the Module Configuration submenu (on
page
65 )
2
Exit Exits the Service Menu and resets the
Management Module card
Module Configuration submenu
The Module Configuration submenu opens when Module Configuration is selected from the terminal
emulation Service Menu or when the telnet session is launched to access the Management Module card.
Option number Submenu Description
1
System Information Displays information about the power unit,
battery packs, and Input/Output Power Module
2
System Setup Sets the date, time, and daylight saving time
parameters
x
Exit Without Saving Exits a menu without saving the changes
s
Save New Changes and
Restart
Saves changes and resets the Management
Module card
d
Restore Configuration to
Factory Defaults
Restores all parameters to default settings
System Information submenu
Option number Submenu Description
1
UPS Information Displays identification information and
firmware version for the power unit and
Input/Output Power Module
2
Battery Information Displays identification information and
firmware version for the battery packs