HP ProOne 400 G1 Maintenance & Service Manual Download Page 18

Page: 18 / 192

2 Display options

Adjusting the audio signal

●

There is no hardware volume control button on the HP ProOne 400 G1 AiO. (However, some

keyboards do have volume function buttons.)

●

Volume can be adjusted with the operating system (OS) master control or the software (SW) audio

player control.

●

The OS master control and SW audio player control are independent. However, they are both

simultaneously active and affect the overall volume of the audio signal.

●

If the audio signal is not audible, check the OS master control and SW audio player control to be

sure that neither is set too low.

Adjusting display brightness

The HP ProOne 400 G1 AiO backlight brightness settings control the overall brightness of the internal

display panel only.

Windows 7 and Windows 8 each offer two methods for controlling the backlight brightness of the

internal display panel. These two options adjust the backlight brightness from 100% down to 30% of

the full backlight brightness.

Windows 7

Select

Control Panel > Power Options

Move the screen brightness slider at the bottom of the window to make adjustments.

– or –

Click

Start > Programs > Productivity and Tools > HP My Display

Select

Adjust

Move the slider to make adjustments.

At the bottom of the window, click

Apply

to save the changes.

Chapter 2 Display options

Summary of Contents for ProOne 400 G1

































































































































































































Search results

Summary of Contents for ProOne 400 G1

Reviews:

Related manuals for ProOne 400 G1

Brands by name

Popular brands

HP ProOne 400 G1, Maintenance & Service Manual

Search results

Summary of Contents for ProOne 400 G1

Reviews:

Related manuals for ProOne 400 G1

Brands by name

Popular brands