HP ProOne 400 G1 Maintenance & Service Manual Download Page 172

Page: 172 / 192

Table 11-1

Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

1801-Microcode Patch Error

Processor is not supported by ROM BIOS.

Upgrade BIOS to proper version.

Change the processor.

2200-PMM Allocation Error during MEBx
Download

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the computer,
restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2201-MEBx Module did not checksum
correctly

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2202-PMM Deallocation Error during MEBx
cleanup

Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

2203-Setup error during MEBx execution

MEBx selection or exit resulted in a setup
failure.

Reboot the computer.

Unplug the power cord, re-seat the
memory modules, and reboot the
computer.

If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.

If the error persists, replace the system
board.

162

Chapter 11 POST Error Messages

Summary of Contents for ProOne 400 G1

































































































































































































Search results

Summary of Contents for ProOne 400 G1

Reviews:

Related manuals for ProOne 400 G1

Brands by name

Popular brands

HP ProOne 400 G1, Maintenance & Service Manual

Search results

Summary of Contents for ProOne 400 G1

Reviews:

Related manuals for ProOne 400 G1

Brands by name

Popular brands