HP PROLIANT ML350 G6 Maintenance And Service Manual Download Page 74

Page: 74 / 103

Removal and replacement procedures 74

Remove the battery.

IMPORTANT:

Replacing the system board battery resets the system ROM to its default

configuration. After replacing the battery, reconfigure the system through RBSU.

To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an

authorized service provider.

HP Trusted Platform Module

The TPM is not a customer-removable part.

CAUTION:

Any attempt to remove an installed TPM from the system board breaks or disfigures

the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,

administrators should consider the system compromised and take appropriate measures to ensure

the integrity of the system data.

If you suspect a TPM board failure, leave the TPM installed and remove the system board ("

System board

" on

page

). Contact an HP authorized service provider for a replacement system board and TPM board.

All manuals and user guides at all-guides.com

Summary of Contents for PROLIANT ML350 G6








































































































Search results

Summary of Contents for PROLIANT ML350 G6

Reviews:

Related manuals for PROLIANT ML350 G6

Brands by name

Popular brands

HP PROLIANT ML350 G6, Maintenance And Service Manual

Search results

Summary of Contents for PROLIANT ML350 G6

Reviews:

Related manuals for PROLIANT ML350 G6

Brands by name

Popular brands