Removal and replacement procedures 40
c.
Remove the heatsink from the processor backplate.
To replace the component:
1.
Clean the old thermal grease from the processor with the alcohol swab. Allow the alcohol to evaporate
before continuing.
2.
Remove the thermal interface protective cover from the heatsink.
CAUTION:
Do not overtighten the screws as this might damage the board, connectors, or screws
and voids the warranty of the board.
3.
Install the heatsink:
a.
Position the heatsink using the guide pin on the processor backplate.
b.
Tighten one pair of diagonally opposite screws halfway, and then tighten the other pair of screws.
