Removal and replacement procedures 34
o
Four-bay LFF drive cage
o
Eight-bay SFF drive cage
To replace the component, reverse the removal procedure.
To convert the four-bay non-hot-plug drive cage to a hot-plug model, remove the cage bracket, and then
install the hot-plug backplane option before installing the cage back to the server ("
Drive cage bracket or
backplane
" on page
34
).
Drive cage bracket or backplane
To remove the component:
1.
Power down the server (on page
26
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.