Hardware options installation 78
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
To install the component:
1.
Power down the server (on page
17
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
17
).
o
Remove the server from the rack (on page
20
).
4.
If installed, remove the security bezel ("
Remove the security bezel (optional)
" on page
21
).
5.
Remove the access panel (on page
21
).
6.
Remove the blank from the front panel. Retain the screw for USB module installation.
Summary of Contents for ProLiant DL160 Gen9
