HP ProLiant DL160 Gen8, Maintenance And Service Manual

Page: 33 / 96

Removal and replacement procedures 33
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 28 ).
4.
Remove the access panel (" Access panel " on page 29 ).
5.
Remove the processor air baffle (" Processor air baffle " on page 30 ).
6.
Remove the PCI riser cage (" PCI riser cage " on page 45 ).
7.
Remove the fan cables, front IO (Input/Output) cables, FBWC cable, power supply cables, and
Mini-SAS cables.
8.
Remove the system board tray:
a.
Loosen the two thumbscrews.
b.
Lift the tray out of the chassis.
9.
Remove the power supply module (" Power supply module " on page 30 ).
10.
Remove the common slot power supply cage.