Removal and replacement procedures 64
6.
Press and hold the processor retaining bracket in place, and then close each processor locking lever.
Press only in the area indicated on the processor retaining bracket.
7.
Install the processor socket cover onto the processor socket of the failed system board.
8.
Clean the old thermal grease from the bottom of the heatsink and the top of the processor with the
alcohol swab. Allow the alcohol to evaporate before continuing.
9.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
10.
Install the heatsink:
a.
Using the guide pin on the processor backplate, position the heatsink.
b.
Tighten one pair of diagonally opposite screws halfway, and then tighten the other pair of screws.
Summary of Contents for ProLiant DL160 Gen8
