HP ProLiant DL160 Gen8, Maintenance And Service Manual

Page: 49 / 96

Removal and replacement procedures 49
o
Cache module on the system board
o
Cache module on a storage controller
To replace the component, reverse the removal procedure.
Capacitor pack
To remove the component:
1.
Power down the server (on page 27 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 28 ).
4.
Remove the access panel (" Access panel " on page 29 ).
5.
Remove the processor air baffle (" Processor air baffle " on page 30 ).
6.
If the cache module is installed on the system board, remove the PCI riser cage (" PCI riser cage " on
page 45 ).