Hardware options installation 41
Installing a hot-plug drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
If installed, remove the security bezel ("
Remove the security bezel (optional)
" on page
19
).
2.
Remove the drive blank.
3.
Prepare the drive.
4.
Install the drive.
5.
Determine the status of the drive from the drive LED definitions ("
Hot-plug drive LED definitions
" on page
14
).
6.
If removed, install the security bezel ("
Security bezel option
" on page
38
).