Hardware options installation 40
5.
Remove the two metal brackets from the drive carrier.
6.
Install the drive in the carrier.
7.
Install the drive.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
8.
If removed, install the security bezel ("
Security bezel option
" on page
38
).
9.
Connect each power cord to the server.
10.
Connect each power cord to the power source.
11.
Power up the server (on page
17
).
To configure arrays, see the
HP Smart Storage Administrator User Guide
on the HP website
(
http://www.hp.com/go/smartstorage/docs
).
