System battery replacement 108
IMPORTANT:
Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, use BIOS/Platform Configuration (RBSU) in the UEFI
System Utilities ("
HP UEFI System Utilities
" on page
97
) to reconfigure the system.
To replace the component:
1.
Insert the battery with the "+" side facing up underneath the outer lip of the socket, and then press the
battery down to secure it in place.
2.
Install the access panel (on page
21
).
3.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
31
).
4.
Power up the server (on page
17
).
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
