HP ProLiant DL100 G2 DPSS, Administration Manual

Page: 32 / 155

Table 5 shows hardware commonality between DL100 G2 models.
Table 5 Commonality between DL100 G2storage server con fi gurations
Feature Item
Server family
ProLiant DL100 G2 Storage Server
Chip set Intel Mukilteo memory controller, Intel ICH7R controller, Intel PXH-V PCI
Expansion slots (2 total) One PCI-X 64-bit 133-MHz standard height, full-length
One PCI-X 64-bit 133-MHz low-pro fi le, half-length
Hot plug cage
SATA
Hot plug back panel
Yes
Power supply (single, NHP)
350 Watts
DVD-ROM (8X)
Yes
1.44 fl oppy disk drive
No
Fans (11 total) Two in power supply
Nine in chassis
NIC (embedded) Two BCM 5751 and 5721 10/100/1000
SCSI (U320 embedded) IPMI 2.0, Hitachi 2168 BMC
Chassis 1U rack
Rail kit included
Yes
Factory image
The DL100 G2 ProLiant Storage Servers are set up at the factory with logical partitions for the operating
system and user data. No additional storage con fi guration is needed.
Physical con fi guration
Depending on the model and version of the OS, each storage server comes with either two or four Serial
Advanced Technology Attachment (SATA) hard disk drives (HDDs). The sections below describe how
these HDDs are con fi gured for each storage server based on whether two or four HDDs are installed.
Two-HDD con fi gurations
The two HDDs included with the storage servers are con fi gured for software RAID fault tolerance using
the motherboard SATA controllers.
The HDDs for the DL100 G2 (Workgroup, 2 drive) are hot-pluggable, but not hot-swappable. The drives
can be removed or inserted while the power is on, but user intervention is needed to rebuild the arrays.
Microsoft Disk Manager is used to present the HDDs to the system as dynamic disks. The primary OS
logical drive resides on disk 0 and is mirrored on disk 1 (see Figure 5 ). The data volume is the second
logical drive mirroring the remaining space on disk 0 with disk 1.
32
Storage server speci fi cations and image con fi gurations