HP ProLiant DL100 G2 DPSS Page 119 Administration Manual Download

Page: 119 / 155

BIOS. When referring to the

rmware on another piece of hardware con

gured in the server, it is called

Option ROM. ProLiant servers have hard drives and Smart Array Controller options that have

rmware

that can be updated.
It is important to update the

rmware (also called “

ashing the ROM”) as part of regular server

maintenance. In addition, checking for speci

rmware updates in between regular updates helps to

keep the server performing optimally. HP recommends checking for a

rmware update before sending a

part back to HP for replacement.
Apply the latest

rmware and software updates using the HP ProLiant Storage Server Service Release

DVD. The DVD provides software updates, upgrades, and enhancements for the storage server. The

Service Release can be ordered without cost from

http://software.hp.com

. On the web site, select the

“Storage and NAS” category. The latest service release version appears in the list of available software.

Maintenance and service

This section describes some of the most common hardware maintenance and servicing procedures

for the HP ProLiant DL100 G2 Storage Server.
The server does not completely power off when the front panel power button is pressed. The power

button toggles server power between On and Standby. In Standby, the server removes power from most

electronics and drives, while portions of the power supply and some internal circuitry remain active. To

completely remove power from the system, disconnect the power cords from the server.

Chassis covers

Two covers can be removed from the top of the DL100 G2:

•

Front top cover

•

Rear top cover

Front top cover

CAUTION:

Remove power to the server by disconnecting the power cord before removing or installing the chassis

top covers.

To remove the front top cover:

Loosen the four screws along the top edge and the two screws on both sides of the cover.

Figure 48 Loosen front top cover screws

Slide the cover to the rear.

HP ProLiant DL100 G2 Storage Server administration guide

119

Summary of Contents for ProLiant DL100 G2 DPSS




























































































































































Search results

Summary of Contents for ProLiant DL100 G2 DPSS

Reviews:

Related manuals for ProLiant DL100 G2 DPSS

Brands by name

Popular brands

HP ProLiant DL100 G2 DPSS, Administration Manual

Search results

Summary of Contents for ProLiant DL100 G2 DPSS

Reviews:

Related manuals for ProLiant DL100 G2 DPSS

Brands by name

Popular brands