Server Blade Configuration and Utilities
Standard Configuration Parameters
5-24
HP ProLiant BL20p Generation 3 Server Blade User Guide
gateway IP.
Beginning IP Address (Bay 1)—Assigns the starting IP address. All IP addresses
must be valid addresses.
Ending IP Address (Bay 16)—Assigns the ending IP address. All IP addresses must
be valid addresses.
Subnet Mask
—
Assigns the subnet mask for the default gateway. This field may be
filled in if either Static IP Bay Configuration or DHCP is enabled. The entire IP
address range must conform to the subnet mask.
Gateway IP Address
—
Assigns the IP address of the network router that connects
the Remote Insight subnet to another subnet where the management PC resides. This
field may be filled in if either Static IP Bay Configuration or DHCP is enabled.
Advanced Configuration Parameters
Domain Name—Allows you to assign the name of the domain in which the iLO will
participate.
Primary DNS Server—Assigns a unique DNS server IP address on your network.
Secondary DNS Server—Assigns a unique DNS server IP address on your network.
Tertiary DNS Server—Assigns a unique DNS server IP address on your network.
Primary WINS Server—Assigns a unique WINS server IP address on your
network.
Secondary WINS Server—Assigns a unique WINS server IP address on your
network.
Static Route #1, #2, and #3 (destination gateway)—Use one of these parameters to
assign the appropriate static route destination and gateway IP address on your
network. The default IP values are 0.0.0.0 and 0.0.0.0, where the first IP address
corresponds to the destination IP, and the second IP address corresponds to the
