Server Blade Operations
2-2
HP ProLiant BL20p Generation 3 Server Blade User Guide
For more information about iLO, refer to Chapter 5, “Server Blade Configuration and
Utilities.”
Powering Down the Server Blade
The ProLiant BL20p Generation 3 server blade can be powered down in either of the
following ways:
•
Use the virtual power button feature in the iLO remote console to power down
the server blade from a remote location. Be sure that the server blade is in
standby mode by observing that the power LED is amber. For iLO information
and procedures, refer to the HP Integrated Lights-Out User Guide.
•
Press the power button on the front of the server blade. Be sure that the server
blade is in standby mode by observing that the power LED is amber. This
process may take 30 seconds, during which time some internal circuitry remains
active.
IMPORTANT: To remove power completely form the server blade, remove the server blade
from the server blade enclosure.
