TouchPad button board
Description
Spare part number
TouchPad button board (includes TouchPad button board cable and TouchPad cable)
686919-001
Before removing the TouchPad button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 48
), and then remove the following components:
a.
Hard drive (see
Hard drive on page 49
)
b.
Optical drive (see
Optical drive on page 53
)
c.
Keyboard (see
Keyboard on page 57
)
d.
Top cover (see
Top cover on page 66
)
Remove the TouchPad button board:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the ZIF connector to which the TouchPad board cable is attached, and then disconnect the
TouchPad board cable
(1)
from the TouchPad board.
3.
Remove the Phillips PM2.5×3.5 screw
(2)
that secures the TouchPad button board to the
top cover.
74
Chapter 4 Removal and replacement procedures
Summary of Contents for Pavilion m6
