Fan
Description
Spare part number
Fan (includes cable)
686901-001
NOTE:
To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side
and rear panel of the computer.
The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is
designed to turn on automatically when high temperature conditions exist. These conditions are affected
by high external temperatures, system power consumption, power management/battery conservation
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 48
), and then remove the following components:
a.
Hard drive (see
Hard drive on page 49
)
b.
Optical drive (see
Optical drive on page 53
)
c.
Keyboard (see
Keyboard on page 57
)
d.
Top cover (see
Top cover on page 66
)
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the fan to the base enclosure.
76
Chapter 4 Removal and replacement procedures
Summary of Contents for Pavilion m6
