HP Pavilion m6 Maintenance And Service Manual Download

Page: 90 / 128

Following the 1, 2, 3, 4, 5, 6, 7 sequence stamped into the heat sink, loosen the seven captive
Philllips screws

(1)

and

(2)

that secure the heat sink to the system board, and then remove the

heat sink

(3)

NOTE:

Due to the adhesive quality of the thermal material located between the heat sink and

the system board components, it may be necessary to move the heat sink from side to side to
detach it.

NOTE:

The following illustration shows the heat sink removal process for a computer model

equipped with an AMD processor. The process for removing the heat sink on a computer model
equipped with an Intel processor is identical.

Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four captive Philllips
screws

(1)

that secure the heat sink to the system board, and then remove the heat sink

(2)

NOTE:

Due to the adhesive quality of the thermal material located between the heat sink and

the system board components, it may be necessary to move the heat sink from side to side to
detach it.

NOTE:

The following illustration shows the heat sink removal process for a computer model

equipped with an AMD processor. The process for removing the heat sink on a computer model
equipped with an Intel processor is identical.

Chapter 4 Removal and replacement procedures

Summary of Contents for Pavilion m6

































































































































Search results

Summary of Contents for Pavilion m6

Reviews:

Related manuals for Pavilion m6

Brands by name

Popular brands

HP Pavilion m6, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion m6

Reviews:

Related manuals for Pavilion m6

Brands by name

Popular brands