HP Pavilion DV6-1030 Page 20 User Manual Download

Page: 20 / 129

Left-side components

Item

Description

Function

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool internal

components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.

External Monitor port

Connects an external VGA monitor or projector.

RJ-45 (network) jack

Connects a network cable.

HDMI port

Connects an optional video or audio device, such as a high-
definition television, or any compatible digital or audio component.

eSATA/USB port

Connects an optional high-performance eSATA component, such
as an eSATA external hard drive, or connects an optional USB
device.

NOTE:

Depending on the computer model, the computer might

include only a USB port.

USB port

Connects an optional USB device.

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

Audio-out (headphone) jack

Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.

Digital Media Slot

Supports the following optional digital card formats:

●

Secure Digital (SD) Memory Card

●

MultiMediaCard (MMC)

●

Memory Stick (MS)

●

Memory Stick Pro (MSP)

●

xD-Picture Card (XD)

Chapter 2 Features

Summary of Contents for Pavilion DV6-1030


































































































































Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands

HP Pavilion DV6-1030, User Manual

Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands