HP Pavilion DV6-1030 User Manual Download

Page: 114 / 129

Security menu

Select

Function

Administrator password

Enter, change, or delete an administrator password.

Power-On Password

Enter, change, or delete a power-on password.

System Configuration menu

Select

Function

Language Support

Change the language of Setup Utility.

Virtualization Technology (select models only)

Enable/disable the processor Virtualization Technology.

LAN Power Saving (select models only)

Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.

Fan Always On

Enable/disable Fan Always On. When enabled, the computer fan is
always on.

Action Keys Mode

Enable/disable the Action Keys.

Boot Options

●

POST (power-on self test)

f10

and

f12

Delay (sec.)

―

Set the delay

for the

f10

and

f12

functions of Setup Utility in intervals of 5 seconds

each (0, 5, 10, 15, 20).

●

HP QuickWeb—Enable/disable the QuickWeb Boot menu in Setup
Utility.

◦

Enable/disable the HP QuickWeb Boot Menu during POST.

◦

Delay to boot Windows—Set the delay for the HP QuickWeb
Boot Menu to 2, 3, 5, 10, 15, or 30 seconds.

●

CD-ROM Boot

―

Enable/disable boot from CD-ROM.

●

Floppy Boot

―

Enable/disable boot from diskette.

●

Internal Network Adapter Boot

―

Enable/disable boot from the

internal network adapter.

●

Boot Order

―

Set the boot order for:

◦

Notebook Hard Drive

◦

Internal CD/DVD ROM Drive

◦

USB Disk on Key/USB Hard Drive

◦

USB CD/DVD ROM Drive

◦

USB Floppy

◦

Network Adapter

104 Appendix A Setup Utility (BIOS)

Summary of Contents for Pavilion DV6-1030


































































































































Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands

HP Pavilion DV6-1030, User Manual

Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands