HP Pavilion DV6-1030 Page 111 User Manual Download

Page: 111 / 129

Setup Utility (BIOS)

Starting Setup Utility

Setup Utility is a ROM-based information and customization utility which is used even when the Windows
operating system is not working.

NOTE:

The Fingerprint Reader (select models only) cannot be used to access Setup Utility.

The utility reports information about the computer and provides settings for startup, security, and other
preferences.

To start Setup Utility:

Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup
Menu screen appears, press the

f10

key.

– or –

Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup
Menu screen appears, press the

esc

key.

When the Startup Menu appears, press the

f10

key.

Using Setup Utility

Changing the language of Setup Utility

To change the language of Setup Utility:

NOTE:

If Setup Utility is not running, begin at step 1. If Setup Utility is running, begin at step 2.

Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup
Menu screen appears, press the

f10

key.

– or –

Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup
Menu screen appears, press the

esc

key. When the Startup Menu appears, press the

f10

key.

Use the arrow keys to select

System Configuration

Language

, and then press the

enter

key.

Use the arrow keys to select a language, and then press the

enter

key.

Starting Setup Utility 101

Summary of Contents for Pavilion DV6-1030


































































































































Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands

HP Pavilion DV6-1030, User Manual

Search results

Summary of Contents for Pavilion DV6-1030

Reviews:

Related manuals for Pavilion DV6-1030

Brands by name

Popular brands