HP Pavilion dv2 Maintenance And Service Manual Download

Page: 19 / 147

Component

Description

(7)

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

(8)

Audio-out (headphone) jack

Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.

(9)

USB port

Connects an optional USB device.

(10)

AC adapter light

●

On: The computer is connected to external power.

●

Off: The computer is not connected to external power.

(11)

Power connector

Connects an AC adapter.

(12)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or stolen.

Right-side components

Summary of Contents for Pavilion dv2




















































































































































Search results

Summary of Contents for Pavilion dv2

Reviews:

Related manuals for Pavilion dv2

Brands by name

Popular brands

HP Pavilion dv2, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion dv2

Reviews:

Related manuals for Pavilion dv2

Brands by name

Popular brands