HP Pavilion dv2 Page 20 Maintenance And Service Manual Download

Page: 20 / 147

Left-side components

Component

Description

(1)

RJ-45 (network) jack

Connects a network cable.

(2)

External monitor port

Connects an external VGA monitor or projector.

(3)

HDMI port (select models only)

Connects an optional video or audio device, such as a high-
definition television, or any compatible digital or audio component.

(4)

USB ports (2)

Connect optional USB devices.

NOTE:

Select models only can be configured with an optional

external USB optical disc drive. For more information, refer to the
printed

Quick Setup

poster.

(5)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool internal

components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.

Chapter 2 External component identification

Summary of Contents for Pavilion dv2




















































































































































Search results

Summary of Contents for Pavilion dv2

Reviews:

Related manuals for Pavilion dv2

Brands by name

Popular brands

HP Pavilion dv2, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion dv2

Reviews:

Related manuals for Pavilion dv2

Brands by name

Popular brands