manualshive.com logo in svg

HP Pavilion 14-e000, Maintenance And Service Manual

Share
Download
HP Pavilion 14-e000 Maintenance And Service Manual Download Page 95

7 Using Setup Utility (BIOS) and

System Diagnostics

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and

output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility

(BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the

amount of system and extended memory.

Starting Setup Utility (BIOS)

To start Setup Utility (BIOS), turn on or restart the computer, quickly press 

esc

, and then press 

f10

.

Information about how to navigate in Setup Utility (BIOS) is located at the bottom of the screen.

NOTE:

Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the

computer from operating properly.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.

Some download packages contain a file named Readme.txt, which contains information regarding

installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed

on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as 

ROM date

 and 

System BIOS

) can be displayed by pressing 

fn

+esc

 (if you are already in Windows) or by using Setup Utility (BIOS).

1.

Start Setup Utility (BIOS).

2.

Use the arrow keys to select 

Main

.

3.

To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select 

Exit

, select

Exit Discarding Changes

, and then press 

enter

.

Starting Setup Utility (BIOS)

85

Summary of Contents for Pavilion 14-e000



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands