HP Pavilion 14-e000 Maintenance And Service Manual Download Page 21 | Manualshive

Page: 21 / 114

background image

Left side

Item

Component

Description

(1)

External monitor port

Connects an external VGA monitor or projector.

(2)

Vent

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

(3)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, any compatible digital or
audio device.

(4)

USB 3.0 ports (2)

Connect optional USB 3.0 devices and provide
enhanced USB power performance.

(5)

Audio-out (headphone) jack

Connects optional powered stereo speakers,
headphones, earbuds, a headset, or a television audio
cable. Also connects an optional headset microphone.
This jack does not support optional microphone-only
devices.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the Regulatory, Safety, and Environmental
Notices. To access this guide, from the Start screen, type
support, select the HP Support Assistant app, select My
computer, and then select User guides.

NOTE:

When a device is connected to the jack,

the computer speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and
audio-in (microphone).

(6)

Memory Card Reader

Reads data from and writes data to digital memory cards
such as Secure Digital (SD).

●

Memory card reader

Left side

11

«
...
19
20
21
22
23
...
»

Summary of Contents for Pavilion 14-e000



















































































































Reviews:

No comments

Related manuals for Pavilion 14-e000

5315 2326 - Aspire

Brand: Acer Pages: 115

5315 2326 - Aspire

Brand: Acer Pages: 110

6460 6263 - TravelMate

Brand: Acer Pages: 138

5610 4179 - Aspire

Brand: Acer Pages: 99

5315 2326 - Aspire

Brand: Acer Pages: 110

Brand: Acer Pages: 315

Toughbook CF-28 Series

Brand: Panasonic Pages: 36

Brand: FeiYu Tech Pages: 5

Brand: FEIYUTECH Pages: 19

Brand: FeiYu Tech Pages: 25

Brand: FEIYUTECH Pages: 16

Brand: YOKOGAWA Pages: 12

Brand: Jetter Pages: 4

Brand: K&K Pages: 8

Brand: K&K Pages: 20

Brand: K&K Pages: 6

Brand: K&K Pages: 3

Brand: K&K Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands