3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 37
), and then remove the following components:
a.
Optical drive (see
Optical drive on page 38
)
b.
Hard drive (see
Hard drive on page 40
)
c.
WLAN module (see
WLAN module on page 42
)
d.
Keyboard (see
Keyboard on page 46
)
e.
Top cover (see
Top cover on page 49
)
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 44
)
●
RTC battery (see
RTC battery on page 60
)
●
Fan (see
Fan on page 62
)
●
Heat sink (see
Heat sink on page 63
)
●
Processor (see
Processor on page 67
)
●
PCH heat sink (see
PCH heat sink on page 69
)
Remove the system board:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3.
Disconnect the optical drive connector cable from the system board.
4.
Turn the computer right side up with the front toward you.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for Pavilion 14-e000
