HP Pavilion 14-e000 Maintenance And Service Manual Download Page 36

Page: 36 / 114

Sequential part number listing

Spare part number

Description

490371-001

Power cord for use in North America (3-pin, black, 1.83-m)

490371-021

Power cord for use in Europe (3-pin, black, 1.83-m)

490371-031

Power cord for use in the United Kingdom and Singapore (3-pin, black, 1.83-m)

490371-061

Power cord for use in Italy (3-pin, black, 1.83-m)

490371-201

Power cord for use in Thailand (3-pin, black, 1.83-m)

490371-AA1

Power cord for use in the People's Republic of China (3-pin, black, 1.83-m).

490371-AB1

Power cord for use in Taiwan (3-pin, black, 1.83-m)

490371-AD1

Power cord for use in Korea (3-pin, black, 1.83-m)

490371-D01

Power cord for use in Argentina (3-pin, black, 1.83-m)

490371-D61

Power cord for use in India (3-pin, black, 1.83-m)

634250-001

750-GB, 5400-rpm, 9.5-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 716179-001.

634932-001

500-GB, 5400-rpm, 9.5-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 716179-001.

637193-001

RTC battery (includes cable and double-sided tape)

670035-001

320-GB, 5400-rpm, 7.0-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 716179-001.

670290-001

Intel Centrino Wireless-N 2230 Combo Adapter for use only on computer models equipped with an
Intel processor

675794-001

Atheros AR9485 802.11b/g/n WiFi Adapter for use on all computer models

676521-001

1-TB, 5400-rpm, 9.5-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 716179-001.

683802-001

500-GB, 5400-rpm, 7.0-mm hard drive (does not include hard drive bracket, hard drive connector
cable, or screws)

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard

Drive Hardware Kit, spare part number 716179-001.

686251-001

Display enclosure

Chapter 3 Illustrated parts catalog

Summary of Contents for Pavilion 14-e000



















































































































Search results

Summary of Contents for Pavilion 14-e000

Reviews:

Related manuals for Pavilion 14-e000

Brands by name

Popular brands

HP Pavilion 14-e000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion 14-e000

Reviews:

Related manuals for Pavilion 14-e000

Brands by name

Popular brands