HP Pavilion 14-e000 Maintenance And Service Manual Download Page 93

Page: 93 / 114

If it is necessary to replace the display panel cable:

Detach the display panel cable

(1)

from the display enclosure. (The display panel cable is

attached to the display enclosure with double-sided tape in multiple locations.)

Release the display panel cable

(2)

from the routing channel built into the display enclosure.

Remove the display panel cable

(3)

The display panel cable is available using spare part number 722913-001 and includes the

webcam/microphone cable.

If it is necessary to replace the wireless antenna cables and transceivers:

NOTE:

Depending on computer model, some computer models may be equipped one or two

sets of wireless antenna cables and transceivers.

Detach the wireless antenna transceivers

(1)

from the display enclosure. (The wireless

antenna transceivers are attached to the display enclosure with double-sided tape.)

Release the wireless antenna cables from the clips and routing channels along the top and

right edges of the display enclosure

(2)

Component replacement procedures

Summary of Contents for Pavilion 14-e000



















































































































Search results

Summary of Contents for Pavilion 14-e000

Reviews:

Brands by name

Popular brands

HP Pavilion 14-e000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion 14-e000

Reviews:

Brands by name

Popular brands