HP P9000 Software Installation Manual Download Page 12

Page: 12 / 128

Figure 1 Optional Device Configuration

NOTE:

The P9000 Command View Advanced Edition Management Server is not required for

Business Continuity Manager. It is required if the Replication Monitor option of CVAE is used.

Prerequisites for Using a z/Linux Volume

Be sure you understand the information in this section before using Business Continuity Manager
on a z/Linux volume.

Note the following limitations:

•

OS/390 is not supported.

•

Only a XP12000/XP10000 and XP24000/XP20000 or P9500 storage system can be used.

•

The copy types that can be used are BC Z, Cnt Ac-S Z, Cnt Ac-J Z, or TrueCopy Asynchronous
for Mainframe (TCzA for XP12000/XP10000/XP24000/XP20000 only).

Overview of HP StorageWorks P9000 for Business Continuity Manager Software

Summary of Contents for P9000

































































































































Search results

Summary of Contents for P9000

Reviews:

Brands by name

Popular brands

HP P9000, Software Installation Manual

Search results

Summary of Contents for P9000

Reviews:

Brands by name

Popular brands