manualshive.com logo in svg

HP P9000, Software Installation Manual

Share
Download
HP P9000 Software Installation Manual Download Page 102

Change the prefix for the dataset name from

HPQYK

to

HPQ.BCM

.

(5)

Change the volume allocated to the SMP/E dataset from

#smp01

to

SMP001

.

(6)

Change RFPREFIX from

HP

to

HPQ.BCM

.

//HPQYK3RC JOB (ACCT#),'RECEIVE BC Z MANAGER',                  -----(1)
//             REGION=0M,CLASS=A,                             -----(2)
//             MSGLEVEL=(1,1),MSGCLASS=X,NOTIFY= -----(3)
//*********************************************************************
//*
//* All Rights Reserved. Copyright (C) 2003, 2011, Hitachi, Ltd.
//*
//*********************************************************************
//*
//* This JCL executes SMP/E RECEIVE to uncompress .XMIT files.
//*
//* Instructions:
//* 1) Modify the JOB statement to match your environment.
//* 2) Modify the following values to match your environment:
//*
//*            Value         Description
//*           --------   --------------------------------
//*           GIMSMP     Installation SMP/E program
//   SET  PFX=HPQYK      Prefix of SMP files                  -----(4)
//   SET  VRM=Vnnnnnn    Second level name (VER REL MOD)
//   SET  VSN=#smp01     DASD volume serial for SMPTLIB       -----(5)
//*           HP See 4) for detail.
//*
//* 3) Select form of SMPPTFIN DD statement depending upon whether
//*    installing from tape or uploaded .XMIT file.
//*
//* 4) Modify the value of RFPREFIX to match the prefix of the dataset
//*    that you created with the JCL 'RECVUPLD'. See the comment
//*    (see 3.) in 'RECVUPLD' for more detail.
//*
//* 5) Submit the JCL.
//*
//*********************************************************************
//RECEIVE  EXEC PGM=GIMSMP
//SMPOUT   DD  SYSOUT=*
//SMPRPT   DD  SYSOUT=*
//SMPLIST  DD  SYSOUT=*
//SYSPRINT DD  SYSOUT=*
//SMPWRK1  DD  UNIT=SYSDA,
//             SPACE=(3120,(0364,0380,500)),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK2  DD  UNIT=SYSDA,
//             SPACE=(3120,(0364,0380,500)),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK3  DD  UNIT=SYSDA,
//             SPACE=(3120,(0364,0380,500)),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK4  DD  UNIT=SYSDA,
//             SPACE=(3120,(0364,0380,500)),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK6  DD  UNIT=SYSDA,
//             SPACE=(3120,(0364,0380,500)),
//             DCB=(RECFM=FB,BLKSIZE=3120)
//SYSUT1   DD  UNIT=SYSDA,SPACE=(3120,(0380,0760))
//SYSUT2   DD  UNIT=SYSDA,SPACE=(3120,(0380,0760))

102 Modifying Sample JCL

Summary of Contents for P9000

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands