HP P3413A, Installation And Configuration Manual

Page: 73 / 82

67
Regulatory Notices - Electromagnetic
Compliance
Electromagnetic Compatibility (EMC) requirements have been established in many
countries to regulate the radio frequency energy generated by Information
Technology Equipment (ITE). This energy is generated during the normal and
intended use of this equipment and so it is limited by country regulations to levels
intended to minimize potential interference to other electrical equipment, including
public safety services.
Two levels of radio frequency energy are allowed according to the type or use of
equipment. Class A levels have been established for use in commercial or business
environments. Class B levels are lower than the Class A requirement and have been
established for use in residential environments. Class B levels are also suitable when
the environment includes electrically sensitive equipment.
The server equipment you have purchased has been provided with a compliance
label to indicate where it may be used with reasonable protection to the environment
in which it is used. Additional statements are provided below to conform to
international and domestic regulations.
Notice for United States
(Federal Communications Commission)
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
C Regulatory Information
NOTE Check the label on your product to determine the level of
operation.