HP P3413A, Installation And Configuration Manual

Page: 38 / 82

Chapter 4 Microsoft Windows 2000 Installation
32
Installing the Driver When Windows 2000 is
Already Installed
To update or install the driver if Windows 2000 is already installed, follow these
instructions:
1. Start Windows 2000.
2. Click the Start button on the Windows 2000 task bar, and then point to Settings.
3. Click the Control Panel.
4. Double-click the System icon.
5. Select the Hardware tab and click the Device Manager button.
6. Under SCSI and RAID Controllers, click on the + sign to the left. This will
display the SCSI adapters currently installed. Right-click on the device you wish
to update and select Properties.
7. Click the Driver tab and click the Update Driver button. The Update Device
Driver Wizard will start. Click Next.
8. Select the “Search for a suitable driver” option and click Next.
9. Select the location where the updated driver is installed and click Next.
10. At this step, Windows 2000 will recommend one of two choices. If it
recommends using the driver found on the driver disk, then click Next and skip
to
Step 12 . It might recommend that you keep the existing driver and mention
that it found other suitable drivers. If this is the case, select “Install one of the
other drivers” and click Next.
11. You may be asked to enter the path for the driver.
\win2000\ultra160\adpu160m.sys
12. Click Finish. You may be required to reboot your system.