HP P3413A, Installation And Configuration Manual

Page: 60 / 82

Chapter 5 Novell NetWare Installation
54
Troubleshooting
Error Messages
The error messages listed below are the messages associated with the <File
Name> adpt160m.ham driver. Messages are listed sequentially according to the last
three digits of the error code. For example, [xxxxx080], [xxxxx081], [xxxxx082],
etc.
[xxxxx080] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed in
your system. Verify that your system has at least the minimum amount of memory
required by your operating system.
[xxxxx081] Adapter software initialization failure
An error has occurred while the driver was setting up its internal data structures.
Verify that your adapter is supported by this version of the driver.
[xxxxx082] Internal driver error
An error has occurred while the driver was setting up its internal data structures. Try
installing the most up-to-date version of the driver available from the HP Web site
located at:
http://www.hp.com
[xxxxx083] Adapter not supported by this version of the driver
Your adapter is not supported by the driver on your system. You may have installed
a new adapter and have not updated the driver on your system.
[xxxxx084] Adapter software initialization failure
An error has occurred while the driver was setting up its internal data structures. Try
installing the most up-to-date version of the driver available from the HP Web site
located at:
http://www.hp.com
NOTE When reporting problems to HP Customer Support, be sure to
include the complete error code in your problem description.