HP P3413A, Installation And Configuration Manual

Page: 11 / 82

5
Chapter 1 Installation and Setup
Figure 1-4. Host Bus Adapter Installed in 64-bit Slot
HP Servers may have vertical or horizontal expansion slots. Refer to your HP Server
manual to locate the PCI slots.
4. Insert the HP Ultra3 SCSI host bus adapter into the PCI expansion slot; press
down firmly until the host adapter clicks into place, then replace the slot cover
screw. When installed properly, the host adapter should appear level with the
expansion slot, as shown above.
NOTE Be careful when inserting the HP Ultra3 SCSI host bus
adapter in a PCI slot. Some 32-bit slots will not accommodate
it, and the host adapter may break if you force it into the slot.