HP OmniBook XE4100 Service Manual Download Page 46

Page: 46 / 110

2-22

Removal and Replacement

HP Omnibook XE4100/XE4500

Removing the Floppy Drive

(HP Authorized Service Providers Only)

Required Equipment

•

Small Phillips screwdriver.

Removal Procedure

Unplug the AC adapter, if present, and remove the battery.

Remove these additional assemblies:

•

Hard disk drive (page 2-6).

•

Keyboard cover (page 2-10).

•

Switchboard PCA (page 2-13).

•

Keyboard (page 2-13).

•

Display assembly (page 2-17).

•

Top case (page 2-20).

Remove the screws (right side) that secure the hard disk drive guide to the motherboard. Note that
the screws (left side) are missing. These screws were removed during the top case removal
procedure.

Disconnect the motherboard cable.

Remove the screws that secure the floppy drive to the motherboard.

Remove the floppy drive.

Summary of Contents for OmniBook XE4100















































































































Search results

Summary of Contents for OmniBook XE4100

Reviews:

Related manuals for OmniBook XE4100

Brands by name

Popular brands

HP OmniBook XE4100, Service Manual

Search results

Summary of Contents for OmniBook XE4100

Reviews:

Related manuals for OmniBook XE4100

Brands by name

Popular brands