background image

2-6

Removal and Replacement

HP Omnibook XE4100/XE4500

Removing the Wireless LAN Mini-PCI Card

(User-Replaceable)

Certain notebooks include a wireless LAN mini-PCI card under the mini-PCI door on the bottom of the
notebook.

 Caution

 Handle the Mini-PCI card only by its edges and provide proper grounding, or you might damage the
card through electrostatic discharge.

Required Equipment

 

 

Small Phillips screwdriver.

Removal Procedure

 

1.

 

Unplug the AC adapter, if present, and then remove the battery.

 

2.

 

On the bottom of the notebook, loosen the captive screws holding the Mini-PCI door, and then
remove the door.

 Caution

 Be careful when connecting and disconnecting the antenna cables from the mini-PCI card.
Damaged cables or connectors can degrade notebook performance.

 

3.

 

Disconnect the two antenna cables from the mini-PCI card.

 

4.

 

Press outward on the latches at the sides of the mini-PCI card to release it (the mini-PCI card pops
up).

 

5.

 

Carefully pull the mini-PCI card out of the connector.

 

 

Figure 2-4. Removing the Mini-PCI Card

Reassembly Notes

 

 

Carefully press the mini-PCI card into the connector at an angle of about 30°, until it is fully
inserted. Then press down on both sides of the mini-PCI card until the latches snap closed.

Summary of Contents for OmniBook XE4100















































































































Reviews: