HP OMEN Maintenance And Service Manual Download Page 62

Page: 62 / 112

Fans

NOTE:

The left and right fans are spared separately.

Description

Spare part number

Left fan

929455-001

Right fan

929456-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement

Before removing the fans, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 33

), and then remove the following components:

Solid state drive (see

Solid state drive on page 37

Hinge covers (see

Hinge covers on page 48

System support brackets (see

System support brackets on page 49

Remove the fans:

Disconnect the fan cables from the system board (1).

Remove the fan cables from the routing path clips (2).

Remove the two Phillips PM2.0×5.7 screws (3) securing the fans to the computer.

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for OMEN

















































































































Search results

Summary of Contents for OMEN

Reviews:

Related manuals for OMEN

Brands by name

Popular brands

HP OMEN, Maintenance And Service Manual

Search results

Summary of Contents for OMEN

Reviews:

Related manuals for OMEN

Brands by name

Popular brands