HP OMEN Maintenance And Service Manual Download Page 86

Page: 86 / 112

Display panel

NOTE:

The display panel spare part kit does not include the display cable or display panel brackets.

Description

Spare part number

15.6 in, WLED, FHD, UWVA, eDP display panel for use with AMD R17M GPU

752920-019

15.6 in, WLED, FHD, UWVA, eDP+NVSR display panel for use with N17E GPU

923006-001

15.6 in, WLED, FHD, UWVA, EDP+PSR display panel for use with N17P GPU

930619-001

15.6 in, WLED, UHD, UWVA, eDP+NVSR display panel for use with N17E GPU

920041-002

15.6 in, WLED, UHD, UWVA, EDP+PSR display panel for use with N17P GPU

929115-002

Display and webcam cable for use only on models equipped with an ultra high definition (UHD) panel and
infrared webcam

929454-001

Display and webcam cable for use only on models equipped with an ultra high definition (UHD) panel and
standard webcam

929453-001

Display and webcam cable for use only on models equipped with an full high definition (FHD) panel and
infrared webcam

929452-001

Display and webcam cable for use only on models equipped with an full high definition (FHD) panel and
standard webcam

929451-001

Display panel bracket, left

929461-001

Display panel bracket, right

929460-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement

Before removing the display panel, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 33

), and then remove the following components:

Hinge covers (see

Hinge covers on page 48

System support brackets (see

System support brackets on page 49

Heat sink (see

Heat sink on page 56

System board (see

System board on page 61

Display assembly (see

Display assembly on page 65

Display bezel (see

Display bezel on page 70

Remove the display panel:

Remove the six Phillips PM1.9×3.5 screws (1) that secure the brackets to the display assembly.

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for OMEN

















































































































Search results

Summary of Contents for OMEN

Reviews:

Related manuals for OMEN

Brands by name

Popular brands

HP OMEN, Maintenance And Service Manual

Search results

Summary of Contents for OMEN

Reviews:

Related manuals for OMEN

Brands by name

Popular brands