manualshive.com logo in svg

HP NonStop Pathway/iTS, Programming Manual

Share
Download
HP NonStop Pathway/iTS Programming Manual Download Page 566

TCP Event Messages

NonStop Pathway/iTS Management Programming Manual— 426749-002

11- 288

ZEMS-TKN-SUBJECT-MARK 

indicates either ZPWY-TKN-TERMNAME or ZPWY-TKN-TCPNAME, which 
contains the name of the TERM or TCP that is the subject of this event message.

If the subject token is ZPWY-TKN-TERMNAME, then 
ZPWY-TKN-INSTRUCTION, ZPWY-TKN-PUNAME, ZPWY-TKN-PUOFFSET, 
ZPWY-TKN-PUVERSION, and ZPWY-TKN-TCLPROGFNAME are included; 
otherwise, these tokens are omitted.

ZPWY-TKN-EVENTCLASS 

has the value ZPWY-VAL-ERROREVENT.

ZPWY-TKN-UNSOLREJECTEDERROR 

contains an error number indicating why an unsolicited message was rejected. 

N

 

indicates that this token can occur in a nested message.  

ZPWY-TKN-INSTRUCTION, ZPWY-TKN-PUNAME, ZPWY-TKN-PUOFFSET, 
ZPWY-TKN-PUVERSION, 

and

 ZPWY-TKN-TCLPROGFNAME 

are conditional tokens specific to this event message; these tokens are included 
only if the subject token is ZPWY-TKN-TERMNAME. For descriptions of these 
tokens, see the 

TS/MP Management Programming Manual

.

Effect.

The TCP rejects the unsolicited message and replies to the sender without 

delivering it to the target requester.

Recovery.

Recovery depends on the type of the error that occurred. 

errnum

 can be 

one of the following:

0

No error.

1

A file-system error occurred.

2

Target terminal is suspended.

3

Target terminal queue is full. (The TERM MAXINPUTMSGS configuration value 
has been exceeded.)

4

Target TCP queue area is full.

5

Target queueing is not enabled. (The TCP MAXINPUTMSGS configuration 
value is set to 0.)

6

Length field in the message exceeds the configured maximum for the TCP.

7

There was an unrecognizable request code (refers to MSG-ID and MSG-
VERSION fields).

8

Named terminal is not found.

Summary of Contents for NonStop Pathway/iTS























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands