TERM Commands
NonStop Pathway/iTS Management Programming Manual— 426749-002
8- 14
INFO TERM
INFO TERM
Use the INFO TERM command to obtain the attribute values defined in the PATHMON
configuration file for a TERM object.
This command can be issued for configured and temporary TERM objects.
Continuation
To obtain information for all TERM objects, initialize the ZTERM field in ZPWY-DDL-
SEL-TERM to ZPWY-VAL-ALLTERM. Reissue the command repeatedly, using the
context token returned by the PATHMON process, until no data is returned in the
response buffer. For more information, see
Specifying Continuation
on page 3-21.
Command Syntax
For tokens that may be present in the command and response buffers but are not
listed, see
Unlisted Tokens
on page 3-36. For descriptions of tokens and fields, see
Section 4 through Section 6.
Command
ZPWY-CMD-INFO
Object Type
ZPWY-OBJ-TERM
Tokens in Command Buffer
ZSPI-TKN-CONTEXT token-type ZSPI-TYP-BYTESTRING.
ZPWY-MAP-SEL-TERM token-type ZPWY-DDL-SEL-TERM. !r
ZPWY-MAP-QUAL-TERM token-type ZPWY-DDL-QUAL-TERM.
ZPWY-MAP-PAR-INFO
token-type ZPWY-DDL-PAR-INFO.
Tokens in Response Buffer
ZSPI-TKN-CONTEXT token-type ZSPI-TYP-BYTESTRING.
ZPWY-MAP-SEL-TERM token-type ZPWY-DDL-SEL-TERM.
ZPWY-MAP-DEF-TERM token-type ZPWY-DDL-DEF-TERM.
Summary of Contents for NonStop Pathway/iTS
Page 28: ...Introduction NonStop Pathway iTS Management Programming Manual 426749 002 1 8 SPI Interface ...
Page 270: ...PROG Commands NonStop Pathway iTS Management Programming Manual 426749 002 9 20 START PROG ...
Page 480: ...TCP Event Messages NonStop Pathway iTS Management Programming Manual 426749 002 11 202 ...