HP NonStop Pathway/iTS Programming Manual Download Page 320

Page: 320 / 694

TCP Event Messages

NonStop Pathway/iTS Management Programming Manual— 426749-002

11 -42

Event-Message Range 3000 Through 3999

Effect.

The I/O operation fails.

Recovery.

If a front-end process is being used, check that it is correctly coded to

emulate the type of the device specified. If a front-end process is not being used, see

Error Recovery

on page 11-4 for instructions on how to locate the problem within the

program.

If this is not a program-related problem, run diagnostics for the device and make any
necessary repairs.

Summary of Contents for NonStop Pathway/iTS























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NonStop Pathway/iTS

Reviews:

HP NonStop Pathway/iTS, Programming Manual, Page: 320 / 694

Search results

Summary of Contents for NonStop Pathway/iTS

Reviews: