manualshive.com logo in svg

HP NonStop Pathway/iTS, Programming Manual, Page: 179 / 694

Share
Download
HP NonStop Pathway/iTS Programming Manual Download Page 179

ZPWY-MAP- Definitions

NonStop Pathway/iTS Management Programming Manual— 426749-002

6- 79

ZPWY-MAP-STATUS-TERMFREEZE

ZPWY-MAP-STATUS-TERMFREEZE

This token reports the freeze status of a terminal that is preventing a server from being 
frozen. It is returned in the response message to a FREEZESTATUS SCTERM 
command.  

ZSTATUSTIME 

gives the time this status was collected as a four-word GMT timestamp.

ZSTATE 

is the state of the TERM object. The following values are valid:  

ZPWY-MAP-TELLNUM

This token contains a number that PATHMON returns to identify the tell message. It is 
always present in the response buffer for ADD TELL commands.   

ZNUMBER

identifies a tell message number. Valid values are in the range from zero to the 
value of the ZMAXTELLS field of ZPWY-DDL-DEF-PATHWAY.

def ZPWY-DDL-STATUS-TERMFREEZE.
   02 ZSTATUSTIME      token-type ZSPI-DDL-TIMESTAMP.
   02 ZSTATE           token-type ZPWY-DDL-FRZSTATETERM-
VALUE.
end.

ZPWY-VAL-SERVERIO

Freeze pending; the server is being used.

ZPWY-VAL-
STOPMODENZ

The STOP-MODE special register has a nonzero 
value.

ZPWY-VAL-FROZEN

The server is frozen.

def ZPWY-DDL-TELLNUM.
  02 ZNUMBER               token-type ZSPI-DDL-INT.
end.

Summary of Contents for NonStop Pathway/iTS























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments