3Com Network Jack NJ2000
Page 6 of 44
Copyright © 2009 3Com Corporation. All Rights Reserved.
Trunk Information
This table will be empty if no trunks have been configured from the
TRUNKS >
Membership
page. The table has four columns as follows:
Trunk
- The Trunk Label.
T1
through
T4
may appear in this column.
Type
- All trunks and ports on this switch are
10/100/1000M
Trunk Status
- An indication of the speed and duplex setting of the trunk. This is a
number, the speed in Mbps, followed by either
Full
for full-duplex or
Half
for half-duplex.
This can be changed on the
TRUNKS > Settings
page.
Ports
- The ports that are members of the trunk.
VLAN Information
VLANs can be added on the
VLANS > VLAN Setup
page. The two columns in this table are used
as follows:
VLAN ID
- A number in the range 1 - 4094 which identifies the VLAN.
VLAN Members
- A list of the ports that are members of the VLAN. By default, all ports
are members of VLAN 1.
