HP Restricted
Template date: 09/2003
NAS 4000s and 9000s Installation Guide
DRAFT
45
6. Select the possible owners and select Next to continue.
7. Specify the dependencies for the ip address resource. The
physical disk should always be selected as a dependency.
8. Select Next to continue.
Note:
The physical disk resource specified in this step must reside in
the same cluster group as specified in the beginning of this wizard
9. Specify the ip address, netmask, and the network the ip
address is to reside on and select Next to continue.
10. Review the configuration and select Finish to create the ip
address for the cluster group.
11. Once the resource is created it is necessary to bring it online.
In the Cluster Resources page, select the resource and select
Bring Online.
12. Select OK on the Bring a Resource Online page to bring the
new ip address resource online.
Configuring ip address resources for the virtual server
name
To configure an ip address resource follow the procedure listed
below.
1. Open the WEBUI select the Cluster tab and then Cluster
Resources link.
2. Select the Create button under the Resource Tasks heading.
3. Select Next to proceed with the wizard.
4. Specify the resource name, description, the cluster group the
share will reside in and the resource type. The resource type
should be network name.
Note:
A network name resource must reside in the same cluster
group as the physical disk resource it will reside on.
