22
HP Restricted
NAS 4000s and 9000s Installation Guide
DRAFT
Template date: 09/2003
5. The RapidLaunch CD should run automatically. If the
program does not start up automatically, the program may be
run manually. Click Start, select Run on the Windows
taskbar, and then type the following:
{CD ROM drive}:\setup.exe
Wait for the interface to start.
6. Go to the NAS device and power it on. It will be several
minutes before the NAS device is accessible on the network.
7. Return to the PC. Select StorageWorks NAS from the Show
drop-down list to have RapidLaunch list all NAS devices on
the network, as shown in
Figure 1
.
Figure 1: RapidLaunch search screen
8. All the NAS devices found on the network are displayed as
shown in
Figure 2
. It may take several minutes for the NAS
device to be found on the network.
Note:
The RapidLaunch utility will refresh periodically, looking for
new devices on the network. Refresh the device list manually by
selecting the Refresh button (the round green button on the bottom
left).
